1·You can change the magnification factor and display or hide the pixel grid.
您可以 更改放大因子以及 显示或隐藏像素网格。
2·The results showed that: 1. Magnification factor was as area index increases.
结果表明1。各类变幅杆的放大系数均随面积系数的增大而增大。
3·The magnification factor for magnifiers and telescopes depends on the reference distance.
放大镜和望远镜的放大倍数也都是依照这个标准距离来确定的。
4·Vibration magnification factor of different floor in structure is gained by monitoring data during experiments.
通过实验监测数据得到了结构不同楼层的振动放大系数。
5·The relatively small reduction in stress intensity magnification factor with increasing stiffness of the stiffener.
随着加强肋刚度的增加，应力强度放大因子则相应有所减小。
6·Formulas for the flow rate, the static eccentricity, the static oil film stiffness and the dynamic magnification factor are given.
文中给出了流量、静态偏心率、静态油膜刚度和动力放大系数的公式。
7·The optimum criterion of MTMD can then be selected as minimization of the minimum values of the maximum dynamic magnification factor(DMF).
于是MTMD的优化准则可定义为设置MTMD结构最大动力放大系数的最小值的最小化。
8·For all image Editor panes with a magnification factor of 4 or greater, you can display a grid that delimits the individual pixels in the image.
对于所有放大因子为4或者更大的图像编辑器窗格，可以显示确定图像中单个像素的界限的网格。
9·According to axially natural period, the relation of the dynamic magnification factor vs the linearly loading time under linearly loading is deduced and presented.
推导并给出了轴向固有周期下线性加载动力放大系数随线性加载时间的变化关系。
10·Employing the formulated transfer function of the structure with the MTD-MTMD, the dynamic magnification factor (DMF) of the structure with the MTD-MTMD is defined.
利用建立的设置MTD MTMD时结构的传递函数，定义了设置MTD MTMD时结构的动力放大系数(DMF)。